X30j-2 torsion shear wrench special torsion shear wrench for steel structure torsion shear bolt electric wrench

X30j-2扭剪扳手适用于m16-30六种扭剪螺栓

X30j-2 torsion shear wrench is applicable to six kinds of M16-30 torsion shear bolts

相当于24和30两台扳手集于一身，重量轻，价格优惠，转速快等优点

Equivalent to 24 and 30 wrenches in one, it has the advantages of light weight, favorable price and fast rotation speed

整机质保两年，套筒终生保用，顺丰包邮

The whole machine is guaranteed for two years, the sleeve is guaranteed for life, and SF post is included

扭剪型必威西汉姆联官网g1线路使用方法：

Usage of torsion shear electric wrench:

1， 用扳手内套筒 插进螺栓尾部梅花头部分，同时向前推动扳手，内套筒后退，使外套筒 套住螺母，若不能 套住螺母请左右转动 手并向前用力。

1. Insert the wrench inner sleeve into the plum blossom head at the end of the bolt, and push the wrench forward at the same time. The inner sleeve retreats to make the outer sleeve cover the nut. If the nut cannot be covered, please turn your hand left and right and exert forward force.

2， 扣动扳手开关，使其旋转。

2. Turn the wrench switch to make it rotate.

拧断梅花头，紧固结束，同时扣动弹出梅花头。

Unscrew the plum blossom head, tighten it, and snap the pop-up plum blossom head at the same time.

扭剪型必威西汉姆联官网g1线路特点：

Characteristics of torsion shear electric wrench:

电动扭力扳手由主机和控制仪两部分组成，主机采用双重绝缘单相串激式电动机和减速机构，结构新颖，体积小，重量轻，更加可靠。由于采用静扭结构，运转平稳，无振动，无冲击，噪音小，操作者不受反力矩的影响，因而劳动强度低。额定电压220V50/60Hz精度±5%

The electric torque wrench is composed of a host machine and a controller. The host machine adopts a double insulated single-phase series motor and a reduction mechanism, which is novel in structure, small in size, light in weight and more reliable. As the static torsion structure is adopted, the operation is stable, without vibration, impact, low noise, and the operator is not affected by the counter torque, so the labor intensity is low. Rated voltage 220v50/60hz accuracy ± 5%

以上就是扭剪扳手为大家介绍的内容，感谢您在百忙之中查看我公司的信息内容，如果您想要了解的更多，欢迎您来电进行咨询!

The above is the torsional shear wrench Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to call us for consultation!