1、使用中应尽量避免磕碰及跌落；
1. Bumping and falling should be avoided as much as possible during use;
2、严禁敲击及用尖硬物碰撞显示区域；
2. It is strictly prohibited to knock or collide with sharp hard objects in the display area;
3、应平稳施力，严禁超过检测范围使用；
3. The force should be applied smoothly, and it is strictly prohibited to use it beyond the detection range;
4、长期停用应将电池取出，以防电池漏液；
4. Take out the battery after long-term shutdown to prevent battery leakage;
5、严禁使用强溶剂（如苯、硝基类油）擦拭面板及显示区域；
5. It is strictly prohibited to use strong solvents (such as benzene, nitro oil) to wipe the panel and display area;
6、严防液体进入扳手内，以免损坏电子元件；
6. Strictly prevent liquid from entering the wrench to avoid damaging electronic components;
7、当电池电压降到不能工作时，应更换电池；
7. When the battery voltage drops to a point where it cannot operate, the battery should be replaced;
8、严禁随意拆卸，以免影响精度，如遇问题，请与厂家或销售商联系；
8. It is strictly prohibited to disassemble at will to avoid affecting the accuracy. In case of any problem, please contact the manufacturer or seller;
9、使用后应回包装盒内；
9. Return to the packaging box after use;
10、调校方法仅供计量校验人员参考，其他人员勿动；
10. The calibration method is only for reference by metrological calibration personnel, and other personnel are not allowed to move;
11、自销售之日起半年内，在正常使用中，非人为因素导致的产品故障均属保修范围
11. Within six months from the date of sale, during normal use, product failures caused by non human factors are covered by the warranty
更多的关于
扭剪扳手价格问题或者详细的内容，请进入我们公司的网站：
网站中会有很多的内容仅供参考。
For more information on the price of torque wrench or detailed content, please visit our company's website: There will be a lot of content on the website for reference only.
