The impact electric wrench is mainly used to initially tighten the bolt. Its use is very simple, that is, just aim at the bolt and pull the power switch. The electric torsional shear wrench is mainly used to finally tighten the torsional shear type high-strength bolt. Its use is to pull the power switch against the bolt until the Torx head of the torsional shear type high-strength bolt is broken. The electric constant torque wrench can be used for initial tightening and final tightening. Its use is to adjust the torque first, and then tighten the bolts. The electric angle wrench mainly belongs to a kind of constant torque wrench. Its use is to adjust the rotation first, and then tighten the bolts. The electric angle wrench is an electric wrench specially used to fasten the bolts at the included angle of the steel frame. Its use principle is the same as that of the electric torsion shear wrench.

扭转剪切扳手主要扭剪型高强度螺栓,它的目的是扭剪型高强度螺栓梅花头打断工作目标扳手头螺栓头,把开关可以开始工作,几秒钟后,螺栓梅花头将被打破,然后拿出一个扳手将梅花头弹出扣动扳机,或完成工作。

The torsional shear wrench is mainly used for torsional shear high-strength bolts. Its purpose is to break the working target wrench head bolt head with the Torx head of torsional shear high-strength bolts. The switch can start to work. After a few seconds, the bolt Torx head will be broken, and then take out a wrench to pop the Torx head to pull the trigger, or complete the work.

必威西汉姆联官网g1线路的影响主要是螺栓开始时,很容易使用和旨在螺栓拉主电源开关线电气zui终扭转剪切扳手扭剪型高强度螺栓,螺栓把电源开关的使用,直到扭剪型高强度螺栓梅花头中断。电动恒转矩扳手可能zui终紧紧初,它的使用是先调整转矩,然后螺栓扳手主要电气角落也属于一种恒转矩扳手,它的使用是先调整旋转程度,然后拧紧螺丝。电动角向扳手是一种特殊的电扳手，专门固定在钢架角的螺栓。它和扭剪必威西汉姆联官网g1线路一样。

The impact of the electric wrench is mainly that the bolt is easy to use at the beginning, and the bolt is designed to pull the main power switch line. The electric Zui final torsion shear wrench is used to twist shear type high-strength bolt, and the bolt turns the power switch until the Torx head of the twist shear type high-strength bolt is interrupted. The electric constant torque wrench may be used to adjust the torque first, and then the main electrical corners of the bolt wrench also belong to a constant torque wrench. Its use is to adjust the rotation first, and then tighten the screws. Electric angle wrench is a special electric wrench, which is specially fixed on the bolts of the steel frame angle. It is the same as the electric wrench for torsion shear.

扭剪型必威西汉姆联官网g1线路的特点：

Characteristics of torsion shear electric wrench:

（1）使用寿命长

(1) Long service life

（2）手柄和机壳材料散热性好

(2) Handle and casing materials have good heat dissipation

（3）功率大

(3) High power

（4）耐撞击性强

(4) Strong impact resistance

（5）手使用

(5) Hand use

以上就是为大家介绍的扭剪扳手有关的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务.

The above is a detailed introduction to the torsion - shear wrench. I hope it will help you If you have any questions, please contact us We will provide you with professional service